Outside Length (mm)
- 622
- 634
- 647
- 648
- 654
- 660
- 673
- 685
- 698
- 710
- 723
- 724
- 730
- 736
- 749
- 761
- 775
- 781
- 787
- 807
- 812
- 832
- 837
- 838
- 851
- 857
- 863
- 876
- 883
- 888
- 889
- 908
- 914
- 927
- 934
- 939
- 946
- 952
- 959
- 964
- 978
- 984
- 990
- 1003
- 1010
- 1015
- 1035
- 1041
- 1054
- 1061
- 1066
- 1079
- 1086
- 1091
- 1105
- 1111
- 1114
- 1117
- 1137
- 1142
- 1162
- 1168
- 1180
- 1188
- 1193
- 1206
- 1213
- 1218
- 1219
- 1226
- 1238
- 1244
- 1251
- 1264
- 1269
- 1289
- 1295
- 1315
- 1320
- 1333
- 1340
- 1345
- 1359
- 1365
- 1371
- 1391
- 1396
- 1409
- 1416
- 1422
- 1435
- 1442
- 1447
- 1467
- 1472
- 1485
- 1498
- 1518
- 1523
- 1537
- 1543
- 1549
- 1569
- 1587
- 1619
- 1625
- 1645
- 1650
- 1663
- 1670
- 1752
- 1772
- 1790
- 1815
- 1823
- 1853
- 1873
- 1891
- 1924
- 1955
- 1975
- 1993
- 2057
- 2077
- 2095
- 2145
- 2247
- 2305
- 2323
- 2374
- 2412
- 2432
- 2450
- 2526
- 2539
- 2559
- 2577
- 2686
- 2692
- 2712
- 2844
- 2864
- 2867
- 2882
- 3050
- 3085
- 3200
- 3220
- 3238
- 3400
- 3441
Pitch Length (mm)
- 606
- 614
- 624
- 627
- 632
- 640
- 657
- 665
- 682
- 690
- 700
- 703
- 708
- 716
- 733
- 741
- 751
- 759
- 767
- 771
- 777
- 792
- 802
- 817
- 822
- 827
- 835
- 843
- 853
- 860
- 868
- 873
- 878
- 894
- 904
- 911
- 916
- 919
- 929
- 932
- 936
- 944
- 954
- 962
- 970
- 980
- 983
- 987
- 995
- 1005
- 1021
- 1031
- 1038
- 1046
- 1049
- 1056
- 1071
- 1081
- 1084
- 1089
- 1097
- 1107
- 1122
- 1132
- 1148
- 1150
- 1158
- 1173
- 1183
- 1186
- 1196
- 1198
- 1203
- 1208
- 1221
- 1224
- 1234
- 1249
- 1259
- 1275
- 1285
- 1300
- 1303
- 1310
- 1325
- 1335
- 1343
- 1351
- 1361
- 1376
- 1379
- 1386
- 1402
- 1412
- 1419
- 1427
- 1437
- 1452
- 1455
- 1478
- 1488
- 1503
- 1513
- 1521
- 1529
- 1539
- 1557
- 1589
- 1605
- 1615
- 1630
- 1633
- 1640
- 1732
- 1742
- 1760
- 1785
- 1793
- 1833
- 1843
- 1861
- 1894
- 1935
- 1945
- 1963
- 2037
- 2047
- 2065
- 2115
- 2217
- 2275
- 2293
- 2344
- 2392
- 2402
- 2420
- 2496
- 2519
- 2529
- 2547
- 2656
- 2672
- 2682
- 2824
- 2834
- 2837
- 2852
- 3030
- 3055
- 3180
- 3190
- 3208
- 3380
- 3411
Inside Length (mm)
- 584
- 597
- 610
- 635
- 660
- 673
- 686
- 711
- 737
- 749
- 762
- 787
- 800
- 813
- 838
- 851
- 864
- 876
- 889
- 902
- 914
- 940
- 953
- 965
- 991
- 1016
- 1041
- 1054
- 1067
- 1092
- 1118
- 1143
- 1156
- 1168
- 1181
- 1194
- 1219
- 1245
- 1270
- 1295
- 1321
- 1346
- 1372
- 1397
- 1422
- 1448
- 1473
- 1499
- 1549
- 1575
- 1600
- 1702
- 1727
- 1753
- 1803
- 1854
- 1905
- 2007
- 2057
- 2159
- 2235
- 2286
- 2362
- 2438
- 2489
- 2616
- 2642
- 2794
- 2997
- 3000
- 3150
- 3350
- 3353
Top Width (mm)
- 10
- 13
- 17
- 22
Depth (mm)
- 6
- 8
- 11
- 14
Temperature Range
- -30˚C to +80˚C
ZX23-OPTI | Super TX Raw Edged Cogged V Belts
V-Belts for industrial use are designated both to RMA standard ZX23-OPTI where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10x584Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …
ZX24-OPTI | Super TX Raw Edged Cogged V Belts
Optibelt ZX24-OPTI Super TX Raw Edged Cogged V Belts can be used on all types of industrial equipment. With an inside length of 24 inches (610mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive …
ZX25-OPTI | Super TX Raw Edged Cogged V Belts
ZX25-OPTI Super TX Raw Edged Cogged V Belts manufactured by Optibelt are energy saving and higher performance thanks to their flexibility.. With an inside length of 25 inches (635mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have special designs with raw edges that allow higher slipping resistance even when …
ZX26-OPTI | Super TX Raw Edged Cogged V Belts
V-Belts for industrial use are designated both to RMA standard ZX26-OPTI where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10x660Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …
ZX27-OPTI | Super TX Raw Edged Cogged V Belts
Optibelt ZX27-OPTI Super TX Raw Edged Cogged V Belts can be used on all types of industrial equipment. With an inside length of 27 inches (686mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive …
ZX28-OPTI | Super TX Raw Edged Cogged V Belts
ZX28-OPTI Super TX Raw Edged Cogged V Belts manufactured by Optibelt are energy saving and higher performance thanks to their flexibility.. With an inside length of 28 inches (711mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have special designs with raw edges that allow higher slipping resistance even when …
ZX29-OPTI | Super TX Raw Edged Cogged V Belts
V-Belts for industrial use are designated both to RMA standard ZX29-OPTI where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10x737Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …
ZX29-1/2-OPTI | Super TX Raw Edged Cogged V Belts
Optibelt ZX29-1/2-OPTI Super TX Raw Edged Cogged V Belts can be used on all types of industrial equipment. With an inside length of 29.5 inches (749mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive …
ZX31-1/2-OPTI | Super TX Raw Edged Cogged V Belts
ZX31-1/2-OPTI Super TX Raw Edged Cogged V Belts manufactured by Optibelt are energy saving and higher performance thanks to their flexibility.. With an inside length of 31.5 inches (800mm) and a ZX section, these Cogged Super TX Raw Edged Cogged V Belts have special designs with raw edges that allow higher slipping resistance even when …
ZX32-OPTI | Super TX Raw Edged Cogged V Belts
V-Belts for industrial use are designated both to RMA standard ZX32-OPTI where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 10x813Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …
