Classical CRE V-Belts

AX70-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility. With an inside length of 70 inches (1778mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions. They …

V-Belts for industrial use are designated both to RMA standard BX43-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1092Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

V-Belts for industrial use are designated both to RMA standard AX71-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1803Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Challenge AX72-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 72 inches (1829mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813. If you require additional information please …

Challenge BX44-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 44 inches (1118mm) and a BX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813. If you require additional information please …

AX73-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility. With an inside length of 73 inches (1854mm) and a AX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions. They …

BX45-CHALL Classical CRE V-Belts manufactured by Challenge are energy saving and higher performance thanks to their flexibility. With an inside length of 45 inches (1143mm) and a BX section, these Cogged Classical CRE V-Belts have special designs with raw edges that allow higher slipping resistance even when they are working with low installation tensions. They …

V-Belts for industrial use are designated both to RMA standard AX74-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 13x1880Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …

Challenge AX75-CHALL Classical CRE V-Belts can be used on all types of industrial equipment. With an inside length of 75 inches (1905mm) and a AX section, these Cogged Classical CRE V-Belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813. If you require additional information please …

V-Belts for industrial use are designated both to RMA standard BX46-CHALL where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard 17x1168Li, where the first number denotes the width in mm, and the second number is the internal length in mm. If you require …